|
| |
The following accessories are available for use with the RCI system:
 | NEW! USB Converter - Each RCI system requires at least one converter
to interface the computer to the RCI network. The USB-1 converter works on
newer systems which lack sufficient serial ports. The USB-1 can be port
powered when used with USB ports that have sufficient power. It can also
be externally powered if desired. In addition, the USB-1 has an 8
conductor jack that allows you to plug a handheld controller directly into the
converter. Now it's a simple matter to add a dedicated connection for a single
handheld or a whole network of handhelds, even if your computer has no
serial ports available. Includes USB cable and 8 to 6 wire interface
converter. Power supply is optional and only required if you do not have a
powered USB port. |
| New Serial Port RS-485 Converter - The RS-4B comes in a new package. As with the USB-1, you can plug a one handheld directly
into the RS-4B, or use the 8 to 6 wire converter to hook it to a whole network
of RCI cards.
|
| PP-1A and PP-2 Plug Panels - Plug Panels for Handheld Controllers,
with black acrylic face plates. Replacement face plates for existing PP-1
panels are also available.
|
PP-1A (Top) and PP-2
PP-1A Plug Panel - Provides two output jacks for handheld
controllers. The PP-1A provides voltage regulation and network
connection for the Handheld. Includes an acrylic front panel that can be
easily mounted to the fascia of the layout. PP-2 Plug
Panel - Similar to the PP-1A but in a space-saving design.
| 6-Wire Phone Cable - This 7-foot cable is available for interconnecting
your RCI cards. Other lengths available on special order - Contact us for
details.
|
| Remote sensor kit - Diode Bridge for mounting remotely from
BD-8 or BD-8D cards. Single Bridges have screw terminals for connection to track and
card input wiring. Quad bridges have our standard plug-in Molex connectors
and will accept screw terminal adapters. |
| Molex Connectors - At the request of many customers, we are now offering
Molex connectors so that you can order them with your boards. Both 8 pin and
10 pin connectors are available. Each set consists of a connector shell
and the required number of wire-crimp pins.
|
|
